Ikegami Editcam 3 DNS-33W Operation Manual page 70

4 - 10 4. OPERATION
Normal Playback
1. Make sure a recorded FP2 is in the FieldPak holder.
If the holder is empty, place a recorded FP2 in the
holder.
2. Set the FIELDPAK switch on the right side of the camera
to "STBY".
3. Select the clip you want to play using the PRIOR key or
the NEXT key on the top of the camera or on the control
switch panel. When selecting a clip in another bin, press
the SHIFT+PRIOR key or SHIFT+NEXT key to switch to
the desired bin, and choose the clip. You can also use the
"BIN" menu of the recorder section.
Notice
The selected clip number is displayed on the Status
screen of the recorder section as well as in the VF.
4. Start playback by pressing the PLAY key on the top of
the camera or on the control switch panel.
Notice
• Playback on the camera is simplified video.
• If no clip is selected before playback, the last
recorded clip will be played.
• Pressing the PLAY key automatically switches to
"DISK" for the input source.
Set FIELDPAK switch
to "STBY"
・L CAM ・A
STBY
・M
・B
SAVE BARS
・H OFF
FIELDPAK GAIN OUTPUT AWB
POWER
VF
CHARA
EJECT
PLAY Key
5. To end the playback, press the STOP key on the top of
the camera or on the control switch panel.
DNS-33W
Camera Right Side
LIGHT
PANEL
TCG
AUDIO 33W
DNS-
POWER
VF
CHARA
PRIOR NEXT
PLAY
STOP REW FF
Control Switch
Panel
SHIFT |<< >>|
CH1 CH2 CH3
FRONT F F
IN ＜ ＞
REAR R R
W W
WIRELESS
OUT
OUTPUT
AUTO
MAN
PLAY STOP
REC
DNS-33W 0503 VOL1 (E)
Notice
To play the same clip again from the beginning,
press the PLAY key after pressing the IN key. When
the PLAY key is pressed after the PRIOR (|<<) key
is pressed, playback will start from the beginning of
the prior clip to the currently selected one.
6. To switch to the image of the camera after the playback,
press the VF CHARA button or the RET button.
[ Playing Images on the LCD Screen ]
The LCD screen is able to play images being shot, FP2
video, and external input video. Press the SHIFT key (on the
right side) and touch the LCD screen. The LCD screen
toggles between menu display and image display.
REC-REVIEW Playback
When the RET button on the carrying handle is pressed with
the output set to "CAM", the ending part for the last several
seconds on the last clip is played. The REC-REVIEW
playback time can be set as "REVIEW LENGTH" under
"PLAYBACK" menu of the recorder section.
During REC-REVIEW operation, image and audio outputs are
selected as shown below.
VF
MON OUT connector
VIDEO OUT connector (main)
Audio (monitor)
Audio (main)
Notice
• No REC-REVIEW operation is performed if the
output is set to "DISK".
• Since the recorder section is placed in playback
mode for REC-REVIEW, audio output (main) is the
playback audio, which is normal.
4.9.3 Clip Deletion
This section explains how to delete a clip recorded on the
FP2.
CH4
F
R
W
1. Make sure a recorded FP2 is in the FieldPak holder. If
CH1/2
CH3/4
the holder is empty, place a recorded FP2 in the holder.
2. Set the FIELDPAK switch on the right side of the camera
to "STBY".
Output Target
Playback image
Image of the camera
Image of the camera
Playback audio signal
Playback audio signal
Output Signal