Ikegami Editcam 3 DNS-33W Operation Manual page 115

5.10.25 OTHERS (Selecting other operation
modes)
The operation procedures and descriptions are the same as
those in "OTHERS" menu of the Normal Menu. Refer to
"5.10.12 Others (Selecting other operation mode)".
5.10.26 INFORMATION (Displaying the camera
information)
WORKING TIME (Working time display)
Displays the accumulated working time of the camera.
SYSTEM ROM VERSION
(ROM version display)
Displays the ROM version and checksum value of the
camera.
INFORMATION
WORKING TIME
：STR-※※※※V※※
ROM VERSION
：CHECK SUM (※※※※)
COPYRIGHT(C) 2004
IKEGAMI TSUSHINKI CO . LTD.
In the part, the actual accumulated working
time is displayed.
In the ※ part, the actual version information
and checksum value are displayed.
5.10.27 MENU CUSTOMIZE
(Customizing the Normal Menu screen)
Sets up the menu items and their orders on the Normal Menu
to suit the users' needs.
1. Select "MENU CUSTOMIZE". The following submenus
are displayed.
The currently displayed items on the Normal Menu are
displayed with a checkmark.
MENU CUSTOMIZE
VF DISPLAY
MONITOR OUT
ZEBRA INDICATOR
! INDICATOR
BARS TITLE/MODE
LOW/MID/HIGH GAIN MODE
BATT/DISK WARNING
SCENE FILE
LEVEL ADJUST
2. Rotate the rotary pulse switch to display the remaining
menu items, as shown on the next figure. The selectable
items are 20 items of the Maintenance Menu (1/3) to (3/
3) except the MENU CUSTOMIZE.
5. SETTINGS AND ADJUSTMENT OF CAMERA
□□□□.□H
(10/10)
□
ﾚ
□ ﾚ
ﾚ
□
□ ﾚ
□ ﾚ
□ ﾚ
□ ﾚ
ﾚ
□
□ ﾚ
DNS-33W 0503 VOL1 (E)
MENU CUSTOMIZE
VF DISPLAY
MONITOR OUT
ZEBRA INDICATOR
! INDICATOR
BARS TITLE/MODE
LOW/MID/HIGH GAIN MODE
BATT/DISK WARNING
SCENE FILE
LEVEL ADJUST
CPU SYSTEM CONTROL
AWB/ABB MODE
AUTO IRIS SET
G.L. PHASE ADJUST
LENS SELECT
EXT VTR REC CONTROL
VIDEO PROCESS MODE
MEMORY CARD
SCREEN ASPECT MODE
OTHERS
INFORMAITION
- CUSTOMIZE DISPLAY -
3. Rotate the rotary pulse switch to move the flashing cursor
to the item to add/delete from the menu.
4. Rotate the rotary pulse switch to place a check to the
checkbox to add the item on the menu screen, or remove
the check from the checkbox to delete the item from the
menu screen.
5. Press the SET button to confirm the change.
6. The order of the menu items can be changed by
"CUSTOMIZE DISPLAY". Select "CUSTOMIZE
DISPLAY", the submenus are displayed.
VF DISPLY
Arrow shaped → MONITOR OUT
cursor
ZEBRA INDICATOR
! INDICATOR
BARS TITLE/MODE
LOW/MID/HIGH GAIN MODE
BATT/DISK WARNING
SCENE FILE
LEVEL ADJUST
OTHERS
7. Rotate the rotary pulse switch to move the flashing cursor
to the item to change the order.
8. An arrow "→" is displayed beside the menu item. Rotate
the rotary pulse switch to move the item up or down the
list.
9. When the menu item is in the required position, press the
SET button to confirm the order.
Notice
Up to 10 menu items can be displayed on the
Normal Menu (however, at least 1 item must be
displayed).
If already 10 items are displayed on the Normal
Menu and a new item needs to be added, delete an
item in advance. The number of items currently
displayed is displayed in the prarenthesis at the top
right side corner of the menu screen.
5 - 41
(10/10)
□ ﾚ
□ ﾚ
□ ﾚ
□ ﾚ
ﾚ
□
□ ﾚ
□ ﾚ
□ ﾚ
ﾚ
□
□
□
□
□
□
□
□
□
□
□ ﾚ
□
＊＊＊ MENU ＊＊＊
DNS-33W