Stop Key; Audio Output Switch; Rec Key; Eject Key - Ikegami Editcam 3 DNS-33W Operation Manual

2 - 10 2. NAME AND FUNCTION

6 STOP Key

Stops all modes playback/record. Also used in conjunction
with various keys.
Operated Key
STOP key + IN key
STOP key + OUT key

7 EJECT Key

Pressed to insert or eject an FP2.

8 AUDIO INPUT Switches

Used to select input signal recorded to the audio channels,
CH1 to CH4.
Setting Value
When selecting microphone input signal
FRONT
connected to the MIC connector on the front side
of the camera.
REAR
When selecting audio input signal connected to
the AUDIO IN CH1/CH2 connector on the rear of
the camera.
WIRELESS
When selecting audio input signal connected to a
wireless receiver.
The input signal, CH1 is selected for channels of odd
number, and the input signal, CH2 is selected for
channels of even number.
(Example)
When CH1: FRONT, CH2: F, CH3: R, and CH4: R are
selected, sound signals to be recorded are as follows:
CH1: CH1 of the front microphone
CH2: CH2 of the front microphone
CH3: Input from the AUDIO IN CH1 connector
CH4: Input from the AUDIO IN CH2 connector
9 AUDIO SELECT Switches
Used to select adjusting mode of the input level of the
audio channels, CH1 and CH2.
Setting Value
When performing automatic adjustment.
AUTO
When performing manual adjustment.(AUTO only
MAN
for CH3 and CH4)
DNS-33W
Description
Clears the IN point.
Clears the OUT point.
Description
Description
DNS-33W 0503 VOL1 (E)

10 AUDIO OUTPUT Switch

Used to select output (CH1/CH2 or CH3/CH4) from the
AUDIO OUT connector on the rear of the camera.

11 REC Key

Starts record of source. This key is used when recording
the images from external input. Press STOP key to stop
recording. The recording function of the external input
video is optional.
12 OUT Key
Goes to mark OUT point in active clip by pressing this
key. If no point, goes to the last frame in the active clip.
Also used in conjunction with various keys as below.
Operated Key
OUT key + > key
OUT key + < key
OUT key + >> key
OUT key + << key
OUT key + >>> key
OUT key + <<< key

13 IN Key

Goes to mark IN point in active clip by pressing this key.
If no point, goes to the first frame in the active clip.
Also used in conjunction with various keys as below.
Operated Key
IN key + > key
IN key + < key
IN key + >> key
IN key + << key
IN key + >>> key
IN key + <<< key
Notice
By default, the first frame of the clip is marked with
the IN point, the last frame of the clip is marked
with the OUT point.
Description
Moves OUT point ahead 1 frame.
Moves OUT point back 1 frame.
Moves OUT point ahead 10
frames.
Moves OUT point back 10 frames.
Moves OUT point ahead 1 second.
Moves OUT point back 1 second.
Description
Moves IN point ahead 1 frame.
Moves IN point back 1 frame.
Moves IN point ahead 10 frames.
Moves IN point back 10 frames.
Moves IN point ahead 1 second.
Moves IN point back 1 second.