Ikegami Editcam 3 DNS-33W Operation Manual page 130

6 - 14 6. SETTINGS AND ADJUSTMENT OF RECORDER SECTION
6.5.5 NETWORK Menu
NETWORK SUPPORT :
1
PRJ
DISABLED
TARGET SETTINGS
TS
2
1 NETWORK SUPPORT
Normally, select "DISABLED".
2 TARGET SETTINGS
Moves to the "TARGET SETTINGS" menu.
Normally, this setting is not necessary.
3 UP
Returns to the "SYSTEM SETUP" menu.
DNS-33W
6.5.6 TOUCH SCREEN Menu
Sets the background color of the LCD.
1
2
3
UP
3
4
1 X BIAS
Normally, set "0".
Adjusts the position of the button by inputting an offset
value if the position of the desired button on the menu
screen and the position where the button responds when
actually touched are out of line in the horizontal direction.
2 Y BIAS
Normally, set "0".
Adjusts the position of the button by inputting an offset
value if the position of the desired button on the menu
screen and the position where the button responds when
actually touched are out of line in the vertical direction.
3 BG COLOR
Selects the background color of the Status screen.
Select one from 9 colors below.
BLACK, RED, YELLOW, GREEN, BLUE, DARK RED,
DARK YELLOW, DARK GREEN, DARK BLUE
4 FG COLOR
Selects the color of the characters on the Status screen.
Select one from 9 colors below.
WHITE, BLACK, GRAY, RED, YELLOW, GREEN,
DARK RED, DARK YELLOW, DARK GREEN
5 STARTUP
Selects the display mode of the LCD upon powering up
of the camera.
6 UP
Returns to the "SYSTEM SETUP" menu.
DNS-33W 0503 VOL1 (E)
X BIAS :
PRJ
0
Y BIAS :
VID
0
BG COLOR :
AUD
BLUE
FG COLOR :
TC
WHITE
Display Mode
RECORDER Menu screen
VIDEO
Video
STARTUP :
5
RECORDER
UP
6
Screen Display