Table of Contents
Advertisement
4 - 4
4. INSTALLATION and CONNECTIONS
4.4
Connection of Power Supply
This section explains how to connect the power supply.
Power supply source for the camera is +12V(allowable range : +11v to +16v).
CAUTION
POWER switch
1. Connect AC connector to an AC power outlet to which commercial power is supplied.
2. Plug the DC cable into the DC OUT connector on the AC pack and push the DC cable into the DC IN connector on
the rear of the camera.
3. Turn ON the POWER switch on the front of the AC pack.
4. Turn ON the POWER switch on the rear of the camera. Lights up during power on.
Before connecting the power, verify that the POWER switch of the
camera is turned "OFF."
Camera rear view
SDI OUT
1
2
COMM
MON
EXT SYNC
G.L
WARNING
CAM
GAIN
AWB
H
M
L
BAR
ABB
POWER
MENU
DC IN
DC IN
DC IN connector
AC connector
AC outlet
POWER
indicator
POWER
switch
AC pack
DC OUT
connector
DC POWER cable
Advertisement
Table of Contents
