Ikegami Editcam 3 DNS-33W Operation Manual page 96

5 - 22 5. SETTINGS AND ADJUSTMENT OF CAMERA
RET SOURCE
(Selecting the return video signal source)
"RET SOURCE" selects the source of return video signals.
To display the external VTR (playback or Rec Review) or the
return picture from the base station on the VF when the RET
button is pressed, select "VTR VIDEO" from "RET
SOURCE". To display video signals input to the GENLOCK
IN connector, select "GL VIDEO" from "RET SOURCE".
Notice
The returned picture is displayed on the VF by pressing
the RET button on the lens or the camera handle.
G.L. INH IN G.L. VIDEO
(Inhibits external synchronization to the
camera by GENLOCK input signal)
To avoid external synchronization by signals input in the
GENLOCK IN connector, select "ON" (the inhibit function
turns ON) from "G.L. INH IN G.L. VIDEO". To perform
external synchronization to the camera, select "OFF".
Notice
"G.L. INH IN G.L. VIDEO" can only be specified when "GL
VIDEO" is set in "RET SOURCE". When "RET VIDEO" is
selected in "RET SOURCE", "---" is displayed for "G.L. INH
IN G.L. VIDEO" and the external synchronization to the
camera by signals input in the GENLOCK IN connector is
always performed.
BARS WITH CAP
(Selects whether or not lens IRIS CAP is
interlocked when BARS is ON)
To close the lens iris when the color bar signal is ON, set
"BARS WITH CAP" to "ON".
When the closing of the iris is inconvenient, such as when
the iris is manually set, select "OFF".
PWR ON AWB OFF CLR
(Canceling AWB OFF setting when the power
is turned ON with a remote controller attached)
"PWR ON AWB OFF CLR" selects whether to cancel the
"AWB OFF" setting in the AWB memory from the last time,
when the power is turned ON with a remote controller attached.
Setting Value
YES Cancels the "OFF" setting in the AWB memory,
and set it to "Ach".
NO
Does not cancel the "OFF" setting in the AWB
memory.
If the previous setting is "AWB OFF" when a remote
controller without the AWB memory switch function is used,
the AWB function cannot be activated. In such a case,
selecting "YES" cancels the AWB OFF setting and activates
the AWB function by setting the memory to Ach.
DNS-33W
Description
DNS-33W 0503 VOL1 (E)
Normally, use the camera with "YES" setting. In special
cases when only the remote controllers with the AWB
memory switch function and the setting should remain as
"AWB OFF", select "NO".
RET CH SEL SW
When using the multi-cable extension equipment, pressing the
VTR button on the zoom lens, the REC button on the camera
handle, and the RET buttons on the camera handle and the
lens switches channel of the return picture sent to the camera.
"RET CH SEL SW" changes the operation mode of the VTR
button, the REC button on the camera handle, and the RET
button.
• RET/VTR mode
Press the RET button to display RET-1, and the VTR
button or the REC button on the camera handle to
display RET-2.
• RET-2 RET+VTR mode
Press and hold the RET button and press the VTR
button or the REC button on the camera handle to
switch to RET-1 and RET-2 in order.
Notice
Only RET+VTR mode is available for the B3 lens.
Lens
VF G TALLY
When a VF other than the standard equipment of this camera
is mounted, set "YES" for the VF with a G tally lamp
function, or set "NO" for the VF without this function.
When a VF as the standard equipment of this camera is
mounted, set "NO".
MENU CURSOR
(Setting the flashing cursor movement after
the menu setting is confirmed)
When "NEXT" is selected for "MENU CURSOR" mode, the
flashing cursor will automatically move to the next setting
item after the menu setting is confirmed by the SET button
(default setting). When "STAY" is selected, the flashing
cursor remains on the confirmed menu after the menu setting
is confirmed.
RET Button
VTR Button