Shooting In Particular Environment - Ikegami Editcam 3 DNS-33W Operation Manual

Character Input
Character input is available when the FP2 volume name or
the bin name is set.
1. By pressing the button assigned to the item to be set,
highlight the item name.
(Screen example: MEDIA TOOLS)
REBUILD DATABASE
RECOVER MEDIA
RESET CLIP NUMBER
TAPE LABEL
F 1GHZW27
2. SELECT the character by pressing the FRAME key (< >),
the PRIOR key (|<<)or the NEXT key (>>|) on the
control switch panel. Pressing the PLAY key determines
the selected characters.
The FRAME key (< >):
Each time the key is pressed, the character to be
selected changes in the order A, B, C, ...
The PRIOR key (|<<) and the NEXT key (>>|):
Each time the key is pressed, the character to be
selected changes skipping four characters like as E, J,
O, ...
After the alphabet characters has displayed, the
numbers will follow.
A, B, C, ..., X, Y, Z, 0, 1, 2, 3, ..., A, B, ...
Once a character is selected, press the FRAME key (< >),
the PRIOR key (|<<) or the NEXT key (>>|) to input the
next character.
REBUILD DATABASE
RECOVER MEDIA
RESET CLIP NUMBER
SET LABEL
TAPE LABEL
. . . . . . A
3. After inputting all the desired characters, press the "SET
LABEL" button.
All the input characters are determined.

4.11 Shooting in Particular Environment

When the camera is used in a particular environment such as
places where the temperature is extremely low, where the
camera is subject to the direct rays of the sun throughout the
day, or where an electric field strong enough to put electronic
circuits out of order exists in the vicinity of the camera, it is
necessary to take some protective measures so that the
camera may operate normally.
Shooting in an Extremely Cold Location
Change the oil for cold districts in advance. Otherwise the oil
is frozen by the cold and the movements of the tripod, focus,
zoom and iris will become heavy.
Put a cold-weather cover on the entire camera, and fully
CLR
warm up the camera before starting shooting.
Shooting in a Dusty Place or in the Rain
The camera is dustproof and rainproof design. However,
when shooting in a dusty place or in the rain, put a dustproof
cover or a rainproof cover on the entire camera.
As the dustproof covers and rainproof covers are available in
various sizes, use one suitable for the purpose intended.
CLR
Shooting in a Place Where the Electric Field
Strength is High
The camera is a precision device. Therefore, its electronic
circuits are adversely affected in a place where the electric
field strength is excessively high such as an airport, a base or
a transmitting station. When shooting in such a place,
completely shield the camera by thoroughly covering it with
aluminum foil.
It is necessary to take the same measure for other devices.
DNS-33W 0503 VOL1 (E)
4. OPERATION
Cold-weather Cover
Dustproof Cover
Rainproof Cover
DNS-33W
4 - 13