Operations Of Recorder Section - Ikegami Editcam 3 DNS-33W Operation Manual

4 - 8 4. OPERATION
3. Push the FieldPak holder cover to close.
4.8.2 FieldPak Replacement
1. Press the EJECT key to open the FieldPak holder.
2. Take out the FP2 from the FieldPak holder.
Push the FieldPak holder cover to close.

4.9 Operations of Recorder Section

This section explains the basic operations of the recorder
section.
4.9.1 Clip Recording
Recorded images and sound data are called "clips". This
section explains how to record a clip onto an FP2.
1. Open the FieldPak holder by pressing the EJECT key on
the top of the camera.
2. Place an FP2 in the FieldPak holder, and push the holder
cover into the camera body.
DNS-33W
Notice
Be sure to use a formatted FP2. For how to format
the FP2, refer to "6.3.1 FMT Menu".
3. Select the output signal of the camera for "SWITCHER"
of "AUDIO/VIDEO" in the menu of the recorder section.
Selection Mode
CAMERA
EXTERNAL
DISK
4. Select the audio input using the AUDIO INPUT switch
on the control switch panel.
5. Set the FIELDPAK switch on the right side of the camera
to "STBY".
STBY
SAVE
FIELDPAK
VF
CHARA
6. Select a bin in which to store the clip recorded. Press the
SHIFT+PRIOR key or SHIFT+NEXT key to switch to the
prior or next bin. You can also use the "BIN" menu of
the recorder section to select the desired bin. Refer to
"6.3.2 BIN Menu" for how to create a new bin and how
to select a bin on the "BIN" menu.
Notice
• Bin is a location where a set of related clips is
stored. A bin can be newly created in the FP2,
and any bin to be used can be selected. The
newly created clip will be recorded in the bin
selected at the time.
• You cannot record to the OUTTAKES bin or the
ORPHANS bin. The unit will record to the last
accessed bin if the REC button is pressed while
displaying OUTTAKES or ORPHANS bin material.
DNS-33W 0503 VOL1 (E)
Output Signal
Output signal of the camera
External input signal
Video signal already recorded on the FP2
Camera Right Side
AUDIO 33W
DNS-
POWER
VF
CHARA
・L ・A
CAM
・M ・B
BARS
・H OFF
GAIN OUTPUT AWB
Set FIELDPAK switch to "STBY"
POWER
LIGHT
PANEL
TCG