Maintenance; Camera Right Side - Ikegami Editcam 3 DNS-33W Operation Manual

7 - 2 7. TROUBLE SHOOTING AND MAINTENANCE
How to Take out FieldPak on Emergency
When FP2 cannot be ejected even if the EJECT key on the
upper part of the camera is pressed, it can be taken out
forcibly by inserting a slotted screwdriver to the
EMERGENCY EJECT hole on the left side of the camera.
1. Turn OFF the power of the camera.
2. Insert a slotted screwdriver etc. to the EMERGENCY
EJECT hole and push down the clasp inside.
The EJECT cover opens. Take out the FP2.

7.2 Maintenance

This section explains the maintenance for DNS-33W.
7.2.1 Inspecting the Camera
Before shooting, carry out the following inspection to check
that the camera is operating properly. It is recommended that
a color monitor be used to check the images during the
inspection.
Checking the Positions of the Switches
Before turning the POWER switch ON, check that the
following switches, knobs, etc. are set to the specified
positions.
[Lens]
Switch
IRIS OPERATION SELECT switch
ZOOM OPERATION SELECT switch
EXTENDER SELECT lever
DNS-33W
Position
A
SERVO
x1
DNS-33W 0503 VOL1 (E)
IRIS OPERATION SELECT Switch
EXTENDER SELECT Lever
MANU SERVO

[Camera Right Side]

Switch
ND FILTER knob
GAIN SELECT switch
AWB SELECT switch
OUTPUT SELECT switch
FIELDPAK switch
P.FUNC switch
Camera Right Side
ND FILTER Knob
P.FUNC Switch
AUDIO
POWER
FIELDPAK
VF
CHARA
Switch
・L ・A
CAM
STBY
・M ・B
BARS
SAVE
・H OFF
FIELDPAK GAIN OUTPUT AWB
POWER
VF
CHARA
GAIN SELECT Switch
ZOOM OPERATION SELECT Switch
Position
1
L
A or B
BARS
STBY
OFF
LIGHT
PANEL
TCG
33W
DNS-
AWB SELECT Switch
OUTPUT SELECT Switch
POWER Switch