Side Mask Function - Ikegami Editcam 3 DNS-33W Operation Manual

2 - 16 2. NAME AND FUNCTION
Audio Level Indicator
The recording level is displayed in the form of a bar
graph on the Audio Level Indicator.
EX RETRO 00:00:00:00
1A B + 6dB
Reference
For details of the setting, refer to "5.10.3 VF
DISPLAY (Selecting various status display modes on
the VF)", " DISPLAY SELECT (Character display
setting)".

Side Mask Function

When the camera output aspect ratio is set to 16:9, the
picture on the VF is displayed with 16:9 aspect ratio. In
consideration of converting to the 4:3 picture, contrast of
the picture outside frame marker area can be adjusted.
The side mask is displayed when the frame marker is set
to the following ratio:
Camera Aspect Mode
With 16:9 mode
With 4:3 mode
Contrast and brightness of the picture outside
the frame marker can be adjusted.
Reference
For details of the setting, refer to "5.10.3 VF
DISPLAY (Selecting various status display modes on
the VF)", " VF DISPLAY 2 (Submenus to select
mode for various displays on the VF)".
DNS-33W
= |
S#- 0001
00:00:00
90
12.0 F16 1/100
Audio Level Indicator
Frame Marker Setting
4:3, 13:9, 14:9, 15:9
13:9, 14:9, 15:9, 16:9
DNS-33W 0503 VOL1 (E)
Switching the Display
The character displays can be set by "DISPLAY MODE"
of the camera menu.
The characters to be displayed on the VF screen differ
depending on the mode.
Setting Value
No characters are displayed except the battery and
OFF
other warnings.
Area Marker/Center Marker/Frame Marker/
1
Recording Time Count Indicator and Audio Level
Indicator are always displayed. When the
following knobs, buttons, and switches are
operated, the settings are displayed for about 2
seconds.
• ND FILTER knob (or ND FILTER SELECT
button)
• ECC FILTER SELECT button
• GAIN SELECT switch
• AWB SELECT switch
• SHUTT/SUP-V switch
• LENS EXTENDER SELECT lever
2
Area Marker/Center Marker/Frame
Marker/Recording Time Count Indicator/Audio
Level Indicator and Filter Position are always
displayed. When the following switches are
operated, the settings are displayed for about 2
seconds when the standard settings are selected or
always displayed when the non-standard settings
are selected.
• GAIN SELECT switch: Standard setting 0dB
• SHUTT/SUP-V switch: Standard setting OFF
• AWB SELECT switch: Standard setting Ach
Reference
For details of the setting, refer to "5.10.3 VF DISPLAY
(Selecting various status display modes on the VF)",
" DISPLAY MODE".
Description