Disk Initialization - Ikegami Editcam 3 DNS-33W Operation Manual

3. Press the "PRJ" (PROJECT) button on the screen.
4. Change the compression format (DV or JFIF) by pressing the
button on the right. Change the compression ratio using the
button on the left.
Display
DV25
DV50
3:1
10:1
20:1
MPG50
If setting is not changed, press the "UP" button and return to
the "BASE" menu.
Notice
Clips with different compression format cannot co-exist in an
FP2. On the other hand, clips with the same compression
format and different compression ratio can co-exist.
When the compression format is changed, replace an FP2
with another FP2 initialized by the compression format to be
used or initialize an FP2 by the same compression format.
5. When the compression format is changed, turn the power ON again.
Changed settings will be applied after the restart.

Disk Initialization

Initialize (format) the hard disk of the FP2.
Perform this procedure when an FP2 needs to be initialized or
an unformatted FP2 is used.
When an unformatted FP2 is loaded, nothing will be displayed
on the "Disk Format Type" field on the Status screen. Check if
a disk format type is displayed before starting initialization.
CAUTION
Note that all data in an FP2 will be erased when the hard disk is initialized.
Compression Ratio
DVCPRO25 compression
DVCPRO50 compression (option)
JFIF3:1 compression
JFIF10:1 compression
JFIF20:1 compression
MPEG50 compression (option)
DNS-33W 0503 VOL1 (E)
QUICK START GUIDE
Press the "PRJ" button.
PROJECT SWITCHER :
PRJ
CAMERA
VIDEO
VID
AUDIO TEST ON
AUD
TIMECODE
TC
This button changes compression ratio.
This button changes compression
format (DV/JFIF).
COMPRESSION :
PRJ
DV25
AUDIO RATE :
VID
48K
STANDARD :
PAL
When setting is not changed, press the
"UP" button and return to the "BASE" menu.
"Disk Format Type" field
DV25 PAL 48k
DVCPRO AIF
LOCAL
0
POWER 15.0V
FP1 02：43：49
FAT32
VID = CAMERA
1
READY
0001/0002
0003
00 : 02 : 06 :14
BIN FAG7CM 1M
3
UP
TYPE :
PRJ
DV
FILE :
VID
AIF
FMT :
VID
DVCam
UP
2 3 4
NLT 1 .0 .9
DNS-33W