Ikegami Editcam 3 DNS-33W Operation Manual page 112

5 - 38 5. SETTINGS AND ADJUSTMENT OF CAMERA
3. When "COMPLETED" is displayed the loading is
completed.
4. To cancel the loading operation, rotate the rotary pulse
switch to select "CANCEL" and press the SET button
before the data is loaded.
When "ALL DATA" is loaded to the camera, "CAMERA
RESTART" will be displayed after "COMPLETED", and the
camera will be restarted.
SAVE FILE
Any file name can be given to files saved on the memory
card. Up to 8 characters can be input as the file name.
However, if a space is inserted within a file name, the
characters input after the space will not be included in the
saved file name.
For details on the procedure to name the files, refer to "5.7.3
Naming Saved Files".
SAVE DATA
Selects the data in the camera to save on the memory card.
1. Select "SAVE DATA".
2. Rotate the rotary pulse switch to select the data to save.
3. Press the SET button to confirm the selection.
Setting Value
LENS Saves the lens files No.1 to No.8
REFERENCE Saves the reference file
SCENE Saves the scene files No.1 to No.8
SNAP SHOT Saves the snap shot file
ALL DATA Saves all data
SAVE(→M.CARD)
Saves the data selected in "SAVE DATA" by the file name
set in "SAVE FILE" on the memory card.
1. Select "SAVE(→M.CARD)" by pressing the SET button.
2. "EXECUTE" is displayed. Press the SET button in this
state. "SAVING..." is displayed and the saving starts.
3. When "COMPLETED" is displayed the saving is
completed.
4. To cancel the saving operation, rotate the rotary pulse
switch to execute "CANCEL" before the data is saved.
DNS-33W
Description
DNS-33W 0503 VOL1 (E)
Notice
If a file name that already exists on the memory card
is set in "SAVE FILE" and "SAVE ( → M.CARD)" is
executed, the message "FILE ALREADY EXIST" will
be displayed and saving operation will be canceled.
If overwriting on the existing file, select "EXECUTE".
If not, select "CANCEL" and retry "SAVE( → M.CARD)"
after changing the file name in "SAVE FILE".
CAUTION
Various error messages may be displayed during
LOAD/SAVE operation.
For the error message types and their definitions,
refer to "5.7.6 Precautions on Using the Memory
Card".
FORMAT/DELETE
Format memory cards so that they can be used for the
camera.
CAUTION
When a memory card is formatted, all the data
recorded on the card will be lost.
1. Select "FORMAT/DELETE" and press the SET button.
2. The following submenus are displayed. Select
"FORMAT" out of the selection mode.
"CANCEL" flashes in the setting field. Rotate the rotary
pulse switch and select "EXECUTE", then press the SET
button.
FORMAT/DELETE
FORMAT
M.CARD TEST
DELETE FILE
DATA
DELETE
3. When the memory card is formatted, "COMPLETE" is
displayed on the screen.
4. Test the memory card to confirm that it is formatted
correctly by selecting "M. CARD TEST" from the
submenus. "CANCEL" flashes in the setting field. Rotate
the rotary pulse switch and select "EXECUTE", then
press the SET button.
EXECUTE
( )