Name And Function; Camera Front Side - Ikegami Editcam 3 DNS-33W Operation Manual

2.

NAME AND FUNCTION

This chapter explains the names and functions of camera parts.

2.1 Camera Front Side

This section explains the names and functions of the parts on the front of the camera.
1
2
1
2
3
4
5
6
1 CABLE Clamp
Used to secure the microphone cable and lens cable.
2 MIC Connector
Used to connect a microphone.
3 LENS Mount
The lens is attached here.
4 LENS LOCK Lever
Locks the LENS mount section.
Used to turn the lens mount ring to secure the lens after
the lens is inserted onto the lens mount.
5 LENS Connector
Used to connect the Pigtail Cable of the lens.
PEAKING CONTRAST BRIGHT ZEBRA TALLY
ON HIGH
OFF LOW
ON AWB
OFF ABB
SHUTT/SUP-V
PUSH
SET
MENU
EARPHONE REC
CABLE Clamp
MIC Connector
LENS Mount
LENS LOCK Lever
LENS Connector
SHUTT/SUP-V Switch
DNS-33W 0503 VOL1 (E)
2. NAME AND FUNCTION
5
4
3
EARPHONE
8
7 AWB/ABB Switch
EARPHONE Terminal
8
9 REC Button
10 SET Button
11 ROTARY PULSE Switch
6 SHUTT/SUP-V Switch
When turned ON, the shutter speed set by the ROTARY
PULSE switch or the Super V mode works, and the
function working is displayed on the VF with characters.
6 7
ON AWB
OFF
ABB
SHUTT/SUP-V
PUSH
SET
MENU
REC
9 10
2 - 1
11
DNS-33W