Ikegami Editcam 3 DNS-33W Operation Manual page 82

5 - 8 5. SETTINGS AND ADJUSTMENT OF CAMERA
4. When all the characters in the parenthesis are set, the
character input mode ends and the new file name is set.
If the file name is less than 8 characters long, be sure to
input blank spaces in the remaining fields. The character
input mode does not end unless there are 8 characters
confirmed as the file name. Rotating the rotary pulse
switch scrolls through the characters as shown in the
figure below:
Camera Front Side
ON
OFF
SHUTT/SUP-V
AUDIO OUT VTR
Rotating the rotary pulse switch UP/DOWN will scroll
＊
through the characters in the following directions.
represents a blank space.
ABCDEFGHIJKLMN OPQRSTUVWXYZ
Notice
If there is already a file saved on the memory card
when "SAVE FILE" is selected and "_ _ _ _ _ _ _ _"
is displayed in the parenthesis, rotating the rotary
pulse switch displays the current file name in the
character field, so the old file name can easily be
edited into a partly changed new file name.
5.7.4 Deleting the Camera Settings on the
Memory Card
This section explains how to delete the camera settings saved
on the memory card.
1. Select "DELETE FILE".
2. Select the file name that contains data to be deleted using
the rotary pulse switch.
The data format of the selected file will be displayed next
to "DATA".
3. Press the SET button to confirm.
4. Select "DELETE" by the SET button. "EXECUTE" is
displayed. Press the SET button to execute.
Data deletion starts. "COMPLETED" is displayed when the
data deletion is completed.
When "CANCEL" is executed using the rotary pulse
switch before the data is deleted, the DELETE operation
will end without execution.
DNS-33W
SET Button
AWB
ABB
MENU
Rotary Pulse Switch
U P
!#$...{}" 0123456789
DOWN
DNS-33W 0503 VOL1 (E)
5.7.5 Naming the Memory Card
The memory card can be named.
MEMORY CARD
LOAD FILE
LOAD DATA
LOAD (→CAMERA )
SAVE FILE
SAVE DATA
SAVE (→M.CARD )
FORMAT/DELETE
M.CARD NAME
1. Select "M.CARD NAME".
The flashing cursor moves and the screen switches to the
character input mode.
2. Select the necessary character using the rotary pulse
switch, and then press the SET button to confirm the
selected character in the parenthesis.
3. When all the character input fields in the parenthesis are
confirmed, the character input mode ends, and the
memory card name is updated. If the file name is less
than 11 characters long, be sure to input blank spaces in
the remaining fields. The character input mode does not
end unless there are 11 characters confirmed as the file
name. Rotating the rotary pulse switch scrolls through the
characters.
Notice
If the memory card is already named, the current
name is displayed in the parenthesis. For a memory
card not yet named, "--NO NAME--" is displayed.
When there is no memory card inserted, "--NO
CARD--" is displayed.
5.7.6 Precautions on Using the Memory Card
When using the memory card which stores the camera data in
other devices (PC, Mobile Terminal, Digital Camera etc.,),
the following precautions are necessary.
• Copying the camera data in the memory card into the PC
is not a particular problem. However, when transferring the
data which is saved in the PC back to the memory card, be
careful about following matters:
Do not change the file name of the camera data.
Do not create or save files or folders other than
camera data on the memory card.
Do not format the memory card on the PC.
• Operation of the memory card used with devices other than
PC, such as mobile terminals and digital camera, has not
been checked. Avoid using these devices as the data of the
memory card may be destroyed.
• When using a memory card that has been used by other
equipment, format the memory card with the camera in
advance.
( )
SCENE1-8
( )
SCENE
( )