Ikegami Editcam 3 DNS-33W Operation Manual page 26

14 QUICK START GUIDE
5. Remaining recording time
Displays remaining recording time calculated by remaining FP2 disk amount.
6. Disk format type
Displays format type of loaded FP2.
Display
FAT32
No display
7. Source of monitor output/video output
Displays video type sent to the VF or monitor output/video output.
Display
VID=CAMERA
VID=DISK
VID=EXTERNAL
8. DISK status
Displays operational status of an FP2.
9. Clip number
Displays recorded first clip number (left) and last clip number (right).
10. Current clip number
During stopping: Current clip number is displayed.
During recording: Clip number created due to recording is displayed.
During playback: Number and length of the clip being played and audio channel number used for the
clip recording are displayed.
11. Time code
Displays information about time code and clip.
[During Recording]
Displays recording time length on the right of the time code.
DNS-33W
Format Type
Single partition by FAT32
An FP2 is not inserted, or an unformatted FP2
is loaded.
Output Video
Video from the camera
Playback video of an FP2
External input video from the GENLOCK IN connector
DNS-33W 0503 VOL1 (E)
DV25 PAL 48k
DVCPRO AIF
LOCAL
0
POWER 15.0V
FP1 02：43：24
FAT32
VID = CAMERA
1
RECORDING
0001/0002
0003
00 : 02 : 11 : - - - - 0 :04
BIN FAG7CM 1M
Time Code Recording Time Length
2 3 4
NLT 1 .0 .9