Audio Level Knob; Retro Loop Switch; Audio Input Level Knobs; Control Switch Panel - Ikegami Editcam 3 DNS-33W Operation Manual

2 - 6 2. NAME AND FUNCTION

3 AUDIO LEVEL Knob

Adjusts the input sound level of the CH1/CH2 microphone
during recording to an FP2.
Adjust the input sound level within the range set in the
AUDIO INPUT LEVEL knob. This knob can be used
when FRONT is selected for CH1/CH2.

4 RETRO LOOP Switch

By pressing this button before starting shooting, the
images shot before pressing the REC button are
additionally recorded for the specified length (times and
minutes). The range available in the specification varies
according to the compression type.
5 Handle
For carrying this equipment.
6 Speaker
The sound can be monitored during recording to an FP2.
The playback sound can be monitored during media
playback.
When an earphone is connected to the EARPHONE
terminal, the sound from the speaker stops.
7 Shoulder Strap Bracket
Used to attach the optional shoulder strap.
8 Color Liquid Crystal Display (LCD) with
Touchscreen Function
Displays the information about video/audio recording and
editing, as well as the output images of the camera and
recorded images.
By touching the LCD, menus of the recorder section can
be operated. By touching the LCD while the SHIFT key
is pressed, displays of the menu screen and images can be
changed on the LCD.
9 FieldPak Access Indicator
The indication lamp lights during the FP2 access.

10 LCD LIGHT Switch

Turns ON/OFF the LCD backlight.

11 PANEL Switch

Changes the enabled/disabled states of the touchscreen
operations on the LCD.
Setting Value
Enables the touchscreen operations.
ON
Disables the touchscreen operations.
OFF

12 TIME CODE SELECT Switch

Selects the way of the recording time progress.
DNS-33W
Description
DNS-33W 0503 VOL1 (E)
Setting Value
The recording time goes on regardless of
F-RUN
operations of the recorder section. This mode is
selected when the recording time of the camera
should be synchronized with another external
equipment.
The recording time goes on only during recording.
R-RUN

13 AUDIO INPUT LEVEL Knobs

Used to adjust the AUDIO INPUT signal levels of CH1
and CH2 manually.
(Signal levels of CH3 and CH4 are adjusted
automatically.)

14 Control Switch Panel

Switches for controlling REC/PLAYBACK/AUDIO of the
recorder section are located.

15 Shoulder Pad

Used for carrying the camera on shoulder.
16 USB Connector
This part is usually unused.

17 IEEE1394 Connector

Used to output the DV stream when the optional board is
installed.

18 CAMERA LEVEL SET Rotary Encoders

Adjusts the level of each mode by rotating these encoders
when level adjustment is performed at only the camera
section. With the menu of the camera section, set any
desired mode. After setting, adjust its level with these
rotary encoders. The menu of the camera section is
displayed on the VF.

19 AUDIO LEDs

Changes the color according to the input level of the
audio signals. Turns red when the level exceeds the limit.

20 POWER Switch

This is a switch for powering on the entire camera.
Setting Value
ON The entire camera is powered.
OFF All the power is turned OFF.

21 VF CHARA Button

While this button is pressed, various states of the camera
such as zebra indicator, markers and characters are
displayed on the VF. When this button is pressed with
the SET button on the camera front side simultaneously,
the menu is displayed. When this button is pressed during
the clip playback, the display changes to the images on
the camera side.
Description
Description