Ikegami Editcam 3 DNS-33W Operation Manual page 94

5 - 20 5. SETTINGS AND ADJUSTMENT OF CAMERA
DISPLAY (Setting the title display)
1. Select "DISPLAY".
2. Select "ON" or "OFF" and confirm.
POSITION (Setting the title position)
1. Select "POSITION".
2. Select "RIGHT" or "LEFT" and confirm.
BARS MODE (Selecting the color bar type)
BARS MODE selects the type of the color bar signal output
when the OUTPUT switch is set to "BARS".
• NORMAL : The conventionally used SMPTE bars.
• SPLIT : The SPLIT bars suitable for SNG relay.
5.10.8 LOW/MID/HIGH GAIN MODE
(Setting the GAIN SELECT switch)
LOW/MID/HIGH GAIN MODE sets up the gain value
allocated to the "L"(LOW)/"M"(MID)/"H"(HIGH) positions of
the GAIN SELECT and HYPER GAIN switches.
Setting is provided from the submenus "LOW GAIN", "MID
GAIN", "HIGH GAIN", and "HYPER GAIN".
MID / HIGH GAIN MODE
LOW GAIN
MID GAIN
HIGH GAIN
HYPER GAIN
Item
-3/0/+3/+6/+9/+12dB
LOW GAIN
MID GAIN 0/+3/+6/+9/+12/+18dB
HIGH GAIN
+3/+6/+9/+12/+18/+24dB
HYPER GAIN
+30/+36/+42/+48dB
Select from +30dB to SEL(30-48)dB.
DNS-33W
NORMAL
SPLIT
0dB
+6dB
+12dB
SEL(30-42dB)
Setting Value
DNS-33W 0503 VOL1 (E)
The values must be in LOW<MID<HIGH<HYPER
relationship.
Reference
For details on how to use the HYPER GAIN, refer to
"5.6.2 Activating the HYPER GAIN".
5.10.9 BATT/DISK WARNING
BATT/DISK WARNING
BATT/DISK WARNING sets up whether to light the FRONT
TALLY lamp or BACK TALLY lamp when the battery
voltage, the remaining battery power, and the remaining disk
space become below the specified value.
WARN FRONT TALLY
"WARN FRONT TALLY" sets up whether to display
status of warnings on the FRONT TALLY.
WARN BACK TALLY
"WARN BACK TALLY" sets up whether to display
status of warnings on the BACK TALLY.
The value to display warnings is set by the following items
in the menu of the recorder section respectively.
Description
Warning level of the "Battery Levels: WARNING" in the
battery voltage "POWER" menu
Warning level of the
"LEVEL" in the "POWER" menu
remaining battery power
"DISK WARN" in the "DISK
Warning level of the
SETTINGS" menu
remaining disk space
Warning level of the "Power Levels: WARNING" in the
DC input voltage "POWER" menu
For details of each menu of the recorder section, refer to "6.
SETTINGS AND ADJUSTMENT OF RECORDER
SECTION".
5.10.10 SCENE FILE
A scene file stores adjusted values of the camera set in
accordance with shooting scenes. SCENE FILE mode is used
when shooting under a special condition, etc.
For SCENE FILE, 8 files (NO.1 to NO.8) can be set up.
SCENE FILE
SCENE NUMBER
STORE SCENE
Setting Value
OFF
READY