Ikegami Editcam 3 DNS-33W Operation Manual page 95

SCENE NUMBER (Loading the scene files)
SCENE NUMBER loads the scene files set in advance.
1. Select "SCENE NUMBER" from "SCENE FILE".
2. Rotate the rotary pulse switch to select a file number, and
press the SET button to confirm.
3. Set "SCENE NUMBER" to "OFF" for normal shooting
condition.
STORE SCENE
Selecting a file number by rotating the rotary pulse switch
and pressing the SET button create a scene file. Selecting
"CANCEL" and pressing the SET button will cancel the file
creation.
5.10.11 LEVEL ADJUST
(Adjusting various levels)
LEVEL ADJUST
MASTER GAMMA
MASTER PED
DTL GAIN
SKIN DTL MODE
SKIN DTL
COLOR SAT MODE
COLOR SAT
ADJUST CLR
MASTER GAMMA
(Adjusting master gamma level)
"MASTER GAMMA" changes the master gamma level
according to the shooting condition. While observing the
waveform monitor, the color monitor or the picture monitor,
rotate the rotary pulse switch to adjust the "MASTER
GAMMA" to a suitable value.
MASTER PED
(Adjusting master pedestal level)
"MASTER PED" changes the master pedestal level according
to the shooting condition.
(EXAMPLE)
The picture quality can be improved by lowering the master
pedestal level when the black level is raised in the fog.
Rotate the rotary pulse switch to change the master pedestal
level. While observing the waveform monitor, the color
monitor or the picture monitor, rotate the rotary pulse switch
to adjust the "MASTER PED" to a suitable value.
Notice
The displayed values in numbers indicate the ratio
of adjustment and not the actual video signal level
(IRE value). To return this level to the factory
setting, activate the auto black balance. For details
on auto black balance operations, refer to "4.7 Auto
White Balance, Auto Black Balance and Auto Black
Shading".
5. SETTINGS AND ADJUSTMENT OF CAMERA
0.0
0.0
0.0
OFF
0.0
OFF
0.0
READY
DNS-33W 0503 VOL1 (E)
DTL GAIN (Adjusting DTL GAIN level)
"DTL GAIN" adjusts the DTL GAIN level according to the
shooting environment. While observing the waveform
monitor, the color monitor or the picture monitor, rotate the
rotary pulse switch to adjust the "DTL GAIN" to a suitable
value.
SKIN DTL MODE
(Turning ON/OFF the Skin DTL)
Turns the SKIN DTL function ON/OFF. For details on the
SKIN DTL function, refer to "5.5 Screen Detail Enhancement
(DTL)", "5.5.1 Skin DTL".
SKIN DTL
(Adjusting the SKIN DTL GAIN level)
"SKIN DTL" adjusts the SKIN DTL GAIN level according to
the shooting environment.
Set the "SKIN DTL MODE" to "ON". While observing the
waveform monitor or the color monitor, rotate the rotary
pulse switch to adjust the "SKIN DTL" to a suitable value.
COLOR SAT MODE
(Turning ON/OFF the color saturation)
"COLOR SAT MODE" turns ON/OFF the color saturation
function.
COLOR SAT
(Adjusting the color saturation level)
"COLOR SAT" adjusts the color saturation level according to
the shooting environment. Set the "COLOR SAT MODE" to
"ON". While observing the waveform monitor or the color
monitor, rotate the rotary pulse switch to adjust the "COLOR
SAT" to a suitable value.
ADJUST CLR
(Clearing the level adjustment data)
"ADJUST CLR" returns all the settings changed at "LEVEL
ADJUST" to the setting before the change. Selecting "PUSH
SET→CLR" by rotating the rotary pulse switch clears the
settings.
Selecting "CANCEL" will end the "ADJUST CLR" screen
without clearing the settings.
5.10.12 OTHERS
(Selecting other operation modes)
OTHERS
RET SOURCE
G.L.INH IN G.L.VIDEO
BARS WITH CAP
PWR ON AWB OFF CLR
RET CH SEL SW
VF G TALLY
MENU CURSOR
5 - 21
VTR VIDEO
---
ON
YES
RET / VTR
NO
NEXT
DNS-33W