Ikegami Editcam 3 DNS-33W Operation Manual page 111

5.10.22 MEMORY CARD
MEMORY CARD
LOAD FILE
LOAD DATA
LOAD (→CAMERA )
SAVE FILE
SAVE DATA
SAVE (→M.CARD )
FORMAT/DELETE
M.CARD NAME (
LOAD FILE
Selects the file from the memory card to load to the camera.
1. Select "LOAD FILE".
2. The names of files stored on the memory card are
displayed in the parenthesis. Scroll and select the file
name to load by rotating the rotary pulse switch.
When the file is not saved on the memory card, "NO
FILE" is displayed in the parenthesis.
3. Press the SET button to confirm the selection.
LOAD DATA
Selects the data from the file selected in "LOAD FILE" to
load to the camera.
1. In "LOAD FILE", select the file to load to the camera.
2. Select "LOAD DATA".
3. Scroll and select the data to load by rotating the rotary
pulse switch.
4. Press the SET button to confirm the selection.
Notice
Depending on the setting selected on "SAVE DATA"
when the data is saved on the memory card, the
data types available on "LOAD DATA" vary.
• When loading files set to "LENS" in "SAVE
DATA", the following items can be set:
Setting Value
LENS1-8 Loads all lens files
LENS1 Only loads lens file No.1
LENS2 Only loads lens file No.2
LENS3 Only loads lens file No.3
LENS4 Only loads lens file No.4
LENS5 Only loads lens file No.5
LENS6 Only loads lens file No.6
LENS7 Only loads lens file No.7
LENS8 Only loads lens file No.8
5. SETTINGS AND ADJUSTMENT OF CAMERA
( )
( )
ALL DATA
)
Description
DNS-33W 0503 VOL1 (E)
• When loading files set to "REFERENCE" in "SAVE
DATA", the following item can be set:
Setting Value
REFERENCE Loads the reference file
• When loading files set to "SCENE" in "SAVE
DATA", the following items can be set:
Setting Value
SCENE1-8 Loads all scene files
SCENE1 Only loads scene file No.1
SCENE2 Only loads scene file No.2
SCENE3 Only loads scene file No.3
SCENE4 Only loads scene file No.4
SCENE5 Only loads scene file No.5
SCENE6 Only loads scene file No.6
SCENE7 Only loads scene file No.7
SCENE8 Only loads scene file No.8
• When loading files set to "SNAP SHOT" in "SAVE
DATA", the following item and the items in
"REFERENCE" and "SCENE" items listed above
can be set:
Setting Value
SNAP SHOT Loads the snapshot file
• When loading files set to "ALL FILES" in "SAVE
DATA", the following items and the items in
"SNAP SHOT" and "LENS" items can be set:
Setting Value
ALL DATA Loads all data in the specified file
MENU DATA Loads data of the menu setting items
VF DATA Loads data of the VF setting items
Notice
If a different format file is selected in "LOAD FILE",
"DIFF DATA" message will be displayed and that file
cannot be selected for "LOAD FILE".
LOAD(→CAMERA)
Loads the data set in "LOAD DATA" of the file selected in
"LOAD FILE" to the camera.
1. Select "LOAD(→CAMERA)".
2. "EXECUTE" is displayed. Press the SET button in this
state. "LOADING..." is displayed and the loading starts.
5 - 37
Description
Description
Description
Description
DNS-33W