Ikegami Editcam 3 DNS-33W Operation Manual page 110

5 - 36 5. SETTINGS AND ADJUSTMENT OF CAMERA
Camera Right Side
LEVEL SET
QUIT
CONTROL FUNCTION
GAIN
1：RED
+6
2：GREEN
+4
3：BLUE
+5
MON OUT ENC
DISP VALUE OFFSET
MANUAL CLR READY
4. To clear the adjusted levels and return them to the normal
level, select "PUSH SET→CLR" in "MANUAL CLR".
The adjusted level data of the currently displayed level
setting items of the FUNCTION is cleared and returns to
the original level. To cancel the clearing operation, select
"CANCEL".
5. Changing the video signals output from the monitor to
ENC signal, Y signal, or R, G, B signals makes it easy
to adjust some of the level setting items.
In such cases, change the signal types output from the
MON OUT connector to ENC, Y, R+G+B, R, G, or B by
selecting "MON OUT" submenu. Rotate the rotary pulse
switch to select the required signal type, and then press
the SET button to confirm the selection.
Notice
• The function of "MON OUT" is the same function
as the "OUTPUT SIGNAL" of "MONITOR OUT"
s u b m e n u o n t h e N o r m a l M e n u a n d t h e
Maintenance Menu. Therefore, no matter from
which menu the signal type was set, the later set
signal type will be output from the MON OUT
connector.
• This setting is only valid during the camera power
is turned on. When the power is turned OFF, the
signal type setting returns to "ENC".
6. "DISP VALUE" submenu changes the set value display
mode of each function can be changed as the following.
Setting Value
ABSOLUTE Displays the value in absolute value.
OFFSET Displays the set value with deviation, with the
factory setting level considered 0.
DNS-33W
LIGHT
PANEL
ON
OFF
ECC
ND 4 1.6% D 8 00 0K + ECC P.FUNC
36.2% C 6 30 0K
11.0% 22.5% A 3 20 0K B 4 30 0K
TCG
F-RUN
FIL R- RUN
-
HEAD HYPER GAIN
CH1 CH3
MIX MIX CH1 CH2 CH3 CH4 CH1
CH2 CH4
FRONT F F F
REA R R R R
CH1/2 CH3/4 W W W
WIRELESS
DNG C Camera ra Sy DNG System wit with
AUDIO 33W CH2
Di Digital ital D Disk Record order OUTPUT
DNS- AUTO CH1/2
MAN CH3/4
STBY ・L CAM ・A
SAVE ・M BARS ・B
・H OFF
FIELDPAK GAIN OUTPUT AWB
POWER
VF
CHARA
(Control
Switch Panel)
1 2 3
CAMERA LEVEL SET
Rotary Encoder
Description
DNS-33W 0503 VOL1 (E)
List of Level Adjustment Items
Function
GAIN
(RED / GREEN / BLUE)
GAMMA (RED / GREEN / BLUE)
GAMMA (MASTER)
FLARE
(RED / GREEN / BLUE)
MANUAL KNEE (POINT / SLOPE)
AUTO KNEE (POINT / SLOPE)
WHT CLIP
(RED / GREEN / BLUE)
DTL (1/2) (GAIN / FREQ / H/V BALANCE)
DTL (2/2) (THRESH / NOISE SUP)
SOFT DTL (WHT SUP / BLK SUP)
SKIN DTL (R HUE / GAIN / B HUE)
R COLOR CORR
(R SAT / R HUE)
G COLOR CORR (G SAT / G HUE)
B COLOR CORR (B SAT / B HUE)
C COLOR CORR
(C SAT / C HUE)
M COLOR CORR (M SAT / M HUE)
Y COLOR CORR (Y SAT / Y HUE)
MATRIX
(R-G / R-B)
MATRIX (G-R / G-B)
MATRIX (B-R / B-G)
COL SAT (COL SAT)
G.L. PHASE (SC COARSE / FINE / H PHASE)
R WHT SHADING (H SAW / H PARA)
R WHT SHADING (V SAW / V PARA)
G WHT SHADING (H SAW / H PARA)
G WHT SHADING
(V SAW / V PARA)
B WHT SHADING (H SAW / H PARA)
B WHT SHADING (V SAW / V PARA)
R BLK SHADING
(H SAW / H PARA)
R BLK SHADING (V SAW / V PARA)
G BLK SHADING (H SAW / H PARA)
G BLK SHADING
(V SAW / V PARA)
B BLK SHADING (H SAW / H PARA)
B BLK SHADING (V SAW / V PARA)
BLACK SET (RED / GREEN / BLUE)
PED (MASTER)
PED
(RED / GREEN / BLUE)
Item