Ikegami Editcam 3 DNS-33W Operation Manual page 59

3.7.2 Connection through VIDEO OUT Connector
This section explains how to connect the camera and the
monitors (PM/WFM) through the VIDEO OUT connector.
1. Connect VIDEO OUT connector at the left side of the camera
and the monitor with a coaxial cable.
Camera Left Side
GL IN
VIDEO
AUDIO
OUT
COAX Cable
75Ω Terminal
VIDEO IN
Notice
When SDI option is attached, connect to the SDI IN
connector of the monitor side.
PUSH
DNG Camera System
with Digital Disk Recorder
TC IN
TC
OUT
VIDEO OUT Connector
PM
WFM
DNS-33W 0503 VOL1 (E)
3. INSTALLATION AND CONNECTION 3 - 11
DNS-33W