Table of Contents
Advertisement
2 NAME and FUNCTION
Chapter 2 NAME and FUNCTION
This section explains the names and functions of the controls
and connectors on the camera.
2.1 Right Side
1
2
3
4
5
(1) UP/DOWN switches
To adjust the assigned item. For the assigned items, refer to
"Chapter 5 Camera Setting and Adjustment."
(2) MENU Rotary Encoder (RE)
The USER MENU screen is displayed by pressing this RE.
Turn the RE to select the operation you wish to use from
the menu items displayed on the screen, and press this RE
to select. The contents of the menu and setting methods are
explained in "Chapter 5 : CAMERA SETTINGS and
ADJUSTMENT".
(3) F1 (Function 1)/F2 (Function 2) switches
Select one of the items available using the menu, and assign it
to F1 or F2 switch.
Please refer to "Chapter 5 : CAMERA SETTINGS and
ADJUSTMENT" for assigning items and method.
(4) CHAR switch
The character display on the VF video (Monitor output)
of various controls of the camera. Pressing the CHAR switch
This is also used to call up the MENU by pressing the MENU
RE simultaneously.
(5) STATUS/POWER Indicator
Displays the status of power supply condition to the camera.
Green light: Power is supplied.
Red light : Warning indication.
Caution
Check the warning contents and handle appropriately.
For the explanation of warnings, refer to "Chapter 6
Troubleshooting."
2
2.2 Right side of the
handle (Option)
2
4
5
6
8
(1) Handle
This is an optional handle.
(2) D-TAP connector
A power output connector (DC +12V 1.5A) that supplies
power to external compact monitors, etc.
This is on the optional handle.
Camera side: D-Tap CN BASE
D-Tap connector (male)
Cable side :
Pin No.
Name
+12V
①
+12V_RET Ground for DC+12V power supply
②
(3) F3 (Function 3)/F4 (Function 4) switches
Select one of the items available using the menu, and assign it
to F3 or F4 switch.
This is on the optional handle.
Please refer to "Chapter 5 : CAMERA SETTINGS and
ADJUSTMENT" for assigning items and method.
(4) VF lock mount
This is on the optional handle.
(5) VF lock ring
This is on the optional handle.
(6) VF front-back lock lever
This is on the optional handle.
UHL-43 2005 VER1 (E)
3
Function
DC +12V power supply
1
7
I/O
OUT
GND
Advertisement
Table of Contents
