2.1 Camera and Viewfinder
① GREEN TALLY indicator
Lights when the GREEN TALLY signal is input to the BS.
② RED TALLY indicator
Lights when the RED TALLY signal is input to the BS. It also lights when the CALL button
on the BS, or control panel is pressed.
③ REAR TALLY switch
Turns ON/OFF the GREEN TALLY and RED TALLY indicators.
ON : Activates lighting function of GREEN and RED TALLY indicators.
OFF : Deactivates lighting function of GREEN and RED TALLY indicators.
④ CALL button
Calls an operator. When this button is pressed, the RED TALLY lamps on the BS, and
control panel light and a buzzer sounds.
⑤ INCOM FRONT VR SELECT switch
Specifies whether to use the right side controls (INCOM MIC switch, INCOM PGM control
knob, and INCOM PHONE control knob) or the controls on the rear of the camera for
controlling the intercom volume and push to talk functions.
INCOM-1 : Enables the use of the right side controls to control the INCOM-1 headset
volume. The INCOM-2 headset volume is controlled by the controls on the
rear of the camera.
OFF
: Disables the use of the right side controls to control intercom. The volume is
controlled by the controls on the rear of the camera.
INCOM-2 : Enables the use of the right side controls to control the INCOM-2 headset
volume. The INCOM-1 headset volume is controlled by the controls on the
rear of the camera.
⑥ INCOM-2 control knob
Controls the intercom volume of the channels allocated to the connector.
⑦ INCOM-2 MIC switch
Turns ON/OFF the INCOM-2 intercom microphone.
ON : Turns ON the intercom microphone.
OFF : Turns OFF the intercom microphone.
PTT : Turns ON the intercom microphone while this switch is pressed.
⑧ INCOM-2 PGM2 control knob
Controls the PGM2 volume of the INCOM-2 program intercom.
⑨ INCOM-2 PGM1 control knob
Controls the PGM1 volume of the INCOM-2 program intercom.
⑩ INCOM-2 connector
Connects the INCOM-2 intercom headset. It is compatible with XLR series or 110-type
phone jack connectors.
⑪ EARPHONE jack
Connects the headset equipped with a mini plug. Voice can be heard when VTR is played
back.
⑫ I/O connector
A multi-connector for input/output signals including GREEN/RED TALLY control output
signals, RET-1/RET-2 control input signals, and RS-422 data control signals.
⑬ HD SDI OUT connector
Outputs the HD-SDI signal to an external system. It can be used as the main line signal
connector when the camera is self-contained and it can be used as the MON OUT connector
when the camera is connected to the BS.
⑭ REMOTE connector
Connects a remote control panel (OCP, MCP, or RCP) to send or receive various control
signals when the camera is self-contained.
22
HC-HD300 1412 VER1 (U)
Reference:
Refer to "7. SPECIFICATIONS
[I/O Connector]" (P134) for
the pin functions of the I/O
connector.