Full Auto Setup And Level Auto Setup - Ikegami HDK-790GX Operation Manual

- - -
Auto Setup Screen
When various auto setup functions execute, the execution status is displayed in the view nder or on the PM. A currently executing
item is indicated by the cursor.
When auto setup successfully completes, "OK" appears beside "Judgement". When it fails, "NG" appears beside "Judgement" with
the cursor on the failed item.
[Auto Setup Monitor Execution Display Screen]
*** AUTO SETUP MONITOR ***
Function: AUTO BLACK SHADING
Mode: Lens No.1
Judgement: Setting
Gain
Ganma
Flare
Pedestal
Black Set
Iris
White Clip
Knee Slope
Knee Point
Auto Knee Slope R G B
Auto Knee Point R G B
Skin Hue

FULL Auto Setup and LEVEL Auto Setup

The FULL auto setup and LEVEL auto setup can be activated from the camera menu, OCP, or MCP. This section explains how to
activate from the camera menu.
1
Shoot an external auto setup chart.
Make sure that the chart is aligned with the camera horizontally and vertically. Also, be sure to provide even light on the
whole chart.
2
Use the CC FILTER switch and ND FILTER switch on the right side of the camera to set the optical fi lter which
suits the light source.
If the operational priority for the lter is not given to the camera, press the FILTER HEAD switch to switch the operational
priority to the camera. When the priority is given to the camera, an asterisk (*) is displayed in the view nder.
3
Select and activate "FULL" or "LEVEL" from the camera menu "AUTO SETUP MODE" - "AUTO SETUP".
Note:
To perform the FULL/LEVEL auto setup from an OCP or MCP, perform the following steps.
1. Press the SETUP button in the function switch part.
2. Press the AUTO SETUP button on the LCD.
3. Press the Full or Level button on the LCD.
4. Press the Start button on the LCD.
[HDK-790GX]
Chart: EXT.
Position: H V
R G B W-Shading Saw R G B
R G B W-Shading Para R G B
R G B B-Shading Saw R G B
R G B B-Shading Para R G B
R G B B-Shading Peak R G B
CNTRL
R G B Chart SERCH
R G B
R G B
R G B
HDK-790GX 1403 VER1 (U)
4.6 Auto Setup
Executing auto setup type
Setup result
Executing auto setup
Auto setup item
4
59