Motorola WS5100 Series Reference Manual page 87

5. Click the Add
see Adding an IP Address for a DNS Server on page
6. Click the Global Settings
and the domain name to be specified. For more information, see
4.2.1.1 Adding an IP Address for a DNS Server
Add an IP address for a new domain server using the
1. Click the Add
The new Configuration
2. Enter the Server IP Address
3. Refer to the Status
messages if something goes wrong in the transaction between the applet and the switch.
4. Click OK to use the changes to the running configuration and close the dialog.
5. Click Cancel
4.2.1.2 Configuring Global Settings
Use the Global Settings
Use this screen to enable/disable the
traceroute etc. using hostnames rather than IP addresses.
1. Click the Global Settings
A Configuration
button to display a screen used to add another domain name server. For more information,
button to open a screen that allows the domain lookup to be enabled/disabled
button within the Domain Network System screen.
screen displays enabling you to add IP address for the DNS Server.
to define the IP address of the new static domain name server.
field for the current state of the requests made from applet. This field displays error
to close the dialog without committing updates to the running configuration.
screen to query domain name servers to resolve domain names to IP addresses.
Domain look
button in the main Domain Network System screen.
screen displays for editing the DNS settings of the server.
4-5.
Configuring Global Settings on page
Add screen.
up, which allows you to use commands like ping,
4-5
Network Setup
4-5.