Motorola WS5100 Series Reference Manual page 280

6-10 WS5100 Series Switch System Reference Guide
2. Click the Configuration
The MU Intrusion Detection tab consists of the following two fields:
• Collection Settings
• Violation Parameters
3. Within the Collection Settings
to scan for MU violations. The available range is from 5 - 300 seconds.
4. Refer to the
Violation Type
Mobile Unit
Radio
Switch
Time to Filter
CAUTION: Setting MU threshold values too low can jeopardize MU performance or break
the MU's connection.
tab.
field, set the
Violation Parameters field to define threshold values that trigger an alarm:
Displays the name of the violation for which threshold values are set in the MU,
radio and switch columns.
Set the MU threshold value for each violation type. If exceeded, the MU will be
filtered and displayed within the Filtered MUs screen. Set the values appropriately
in respect to the number of MUs within the switch managed network and how
often they are associating/disassociating, and have their authentication and
encryption credentials verified.
Set the radio threshold value for each violation type. If exceeded, the MU is
filtered and displayed within the Filtered MUs screen.
Set the switch's threshold value for each violation type. If exceeded, the offending
MU is filtered (from the switch) and displayed within the Filtered MUs screen.
Set the Time to Filter interval (in seconds) the switch uses to filter out MUs defined
as committing a violation. Refer to
the contents of the MUs that have been filtered thus far.
Detection Window interval (in seconds) the switch uses
Viewing Filtered MUs on page 6-11 to review