Motorola WS5100 Series Reference Manual page 374

7-8 WS5100 Series Switch System Reference Guide
4. Highlight an existing v3 entry and click the
Priv Protocol.
For additional information, see
5. Highlight an existing SNMP v3 User Name and click the
specified user. When selected the status of the user is defined as active.
6. Highlight an existing SNMP v3 User Name and click the
specified user. When selected the status of the user is defined as inactive.
7.3.2.1 Editing a SNMP v3 Authentication and Privacy Password
The Edit screen enables the user to modify the password required to change the authentication keys.
Updating the password requires logging off of the system. Updating the existing password creates new
authentication and encryption keys. To edit an SNMP v3 user profile:
1. Select Management Access > SNMP Access
2. Select the v3
3. Highlight an existing SNMP v3 User Name and click the
The Authentication Protocol
is not an editable option. The
Protocol is also not an editable option.
4. Enter the Old Password
User Profile.
5. Enter the New
6. Click OK to save and add the changes to the running configuration and close the dialog.
7. Refer to the
messages if something goes wrong in the transaction between the applet and the switch.
8. Click Cancel
Editing an Existing SNMP v1/v2 Community Name on page 7-6
tab from within the SNMP Access screen.
is the existing protocol for the User Profile. The Authentication Protocol
Privacy Protocol
used to grant Authentication Protocol and Privacy Protocol permissions for the
Password, then verify the new password within the
Status field for the current state of the requests made from applet. This field displays error
to close the dialog without committing updates to the running configuration.
Edit button to modify the password for the Auth Protocol and
Enable button to enable the log-in for the
Disable button to disable the log-in for the
from the main menu tree.
Edit button.
is the existing protocol for the User Profile. The Privacy
Confirm New Password area.