Viewing The Port Configuration - Motorola WS5100 Series Reference Manual

3.2.1 Viewing the Port Configuration

The Configuration
information to determine whether an existing port configuration can be used as is or requires modification
for use within the switch managed network.
To view configuration details for the uplink and downlink ports:
1. Select Switch
2. Select the Configuration
Name
MAC Address
Admin Status
Speed
Duplex
3. Select a port and click the
Editing the Port
3.2.1.1 Editing the Port Configuration
To modify the port configuration:
1. Select a port from the table displayed within the Configuration screen.
tab displays the current configuration for the switch ports. Use the port configuration
> Port from the main menu tree.
tab to display the following read-only information:
Displays the current port name. By default, eth1 and eth2 are available.
Displays the port's MAC Address. This value is read-only, set at the factory and
cannot be modified.
Displays whether the port is currently Up or Down.
Displays the current speed of the data transmitted and received over the port.
Displays the port as either half or full duplex.
Edit button to modify the port configuration. For additional information, see
Configuration.
3-9
Switch Information