Configuring Trap Thresholds - Motorola WS5100 Series Reference Manual

7.4.2 Configuring Trap Thresholds

Use the Wireless Statistics Thresholds
individual trap descriptions. Refer to the greater than, less than and worse than conditions to interpret how
the values should be defined. Additionally, the Unit of threshold Values increment should be referenced to
interpret the unit of measurement used.
To configure SNMP trap threshold values:
1. Select Management Access
2. Click the Wireless Statistics Thresholds
3. Refer to the following information for thresholds descriptions, conditions, editable threshold values and
units of measurement.
Threshold Name
(Description)
Threshold Conditions Displays the criteria used for generating a trap for the specific event. The Threshold
Threshold values for:
MU
Threshold values for:
AP
Threshold values for:
WLAN
screen to modify existing threshold conditions values for
> SNMP Trap Configuration
tab.
Displays the target metric for the data displayed to the right of the item. It defines
a performance criteria used as a target for trap configuration.
conditions appear as greater than, less then or worse then and define a baseline
for trap generation.
Displays a threshold value for associated MUs. Use the
Threshold Conditions as input criteria to define an appropriate Threshold Value
unique to the MUs within the network. For information on specific values, see
Wireless Trap Threshold Values on page
Set a threshold value for adopted APs. Use the
Conditions as input criteria to define an appropriate Threshold Value unique to the
APs within the network. For information on specific values, see
Threshold Values on page 7-15.
Use the Threshold Name and
an appropriate Threshold Value unique to the switch. For information on specific
values, see Wireless Trap Threshold Values on page
from the main menu tree.
Threshold Name
7-15.
Threshold Name
Threshold Conditions as input criteria to define
7-15.
7-13
Switch Management
and
and Threshold
Wireless Trap