Reviewing Redundancy Status - Motorola WS5100 Series Reference Manual

Trigger
Description
4. Click Apply to save any changes to the screen. Navigating away from the screen without clicking the
Apply button results in all the changes on the screen being discarded.
5. Click the Revert

5.4.1 Reviewing Redundancy Status

The switch is capable of displaying the status of the collective membership of the cluster. Use this
information to assess the overall health and performance of the group.
NOTE: When ETH2 of one of the group members is unplugged, the other members report
that this member as gone, but an AP will continue to be adopted by the switch with no
ETH2 connectivity.
To configure switch redundancy memberships:
1. Select Services
The Redundancy screen displays with the Configuration tab selected.
2. Select the Status
Displays the event causing the redundancy group state change on the switch.
Displays a redundancy event description defining the redundancy group state
change on the switch. Typical states include Redundancy Disabled or Redundancy
Enabled.
button to undo the changes to the screen and revert to the last saved configuration.
> Redundancy from the main menu tree.
tab.
5-37
Switch Services