Motorola WS5100 Series Reference Manual page 100

4-18 WS5100 Series Switch System Reference Guide
2. Click the Details
3. The Interface Statistics
Name
MAC Address
Input Bytes
Input Unicast
Packets
Input NonUnicast
Packets
Input Total Packets
Input Packets
Dropped
Input Packets Error
Output Bytes
Output Unicast
Packets
Output NonUnicast
Packets
button.
screen displays with the following content:
Displays the title of the logical interface selected.
Displays physical address information associated with the interface. This address
is read-only (hard-coded at the factory) and cannot be modified.
Displays the number of bytes received by the interface.
Displays the number of unicast packets (packets directed towards the interface)
received at the interface.
Displays the number of NonUnicast Packets (Multicast and Broadcast Packets)
received at the interface.
Displays the total number of packets received at the interface.
Displays the number of packets dropped at the interface by the input Queue of the
hardware unit /software module associated with the VLAN interface. Packets are
dropped when the input Queue of the interface is full or unable to handle incoming
traffic.
Displays the number of packets with errors at the interface. Input Packet Errors are
input errors occurring due to; no buffer space/ignored packets due to broadcast
storms, packets larger than maximum packet size, framing errors, input rate
exceeding the receiver's date handling rate or cyclic redundancy check errors. In
all these cases, an error is reported.
Displays the number of bytes transmitted from the interface.
Displays the number of unicast packets (packets directed towards a single
destination address) transmitted from the interface.
Displays the number of unicast packets transmitted from the interface.