Motorola WS5100 Series Reference Manual page 66

3-20 WS5100 Series Switch System Reference Guide
1. Click the Transfer Files
2. Refer to the
From
File
Using
IP Address
User ID
Password
Path
3. Refer to the
To
File
4. Refer to the
"SET/GET" operation from the applet. The Status field displays error messages if something goes wrong
in the transaction between the applet and the switch.
5. Click the Transfer
as necessary to move each desired configuration file to the specified location.
6. Click the Abort
7. Click the Close
transferred, there is nothing else to be saved within the Transfer screen.
button on the bottom of the Configuration screen.
Source field to define the location and address information for the source config file.
Select the location representing the source file's current location using the
drop-down menu. Options include
Specify a source file for the file transfer. If the switch is selected, the file used at
startup automatically displays within the File parameter.
Refer to the Using drop down-menu to configure whether the log file transfer is
conducted using FTP or TFTP. FTP transfers require a valid user ID and password.
Enter the IP Address
Ensure the IP address is valid or risk jeopardizing the success of the file transfer.
Enter the User ID credentials required to transfer the configuration file from a FTP
server.
Enter the Password
Specify an appropriate
or server. The Target options are different depending on the target selected.
Target field to specify the details of the target file.
Use the To drop-down menu to define the location of the configuration file.
Options include the switch (default location), external server or local disk.
Use the File field to specify a target file for the file transfer. Use the File Browser
icon to search attached files systems for target file location.
Status field for the current state of the requests made from the applet. Requests are any
button when ready to move the target file to the specified location. Repeat the process
button to cancel the file transfer process before it is complete.
button to exit the Transfer screen and return to the Config Files screen. Once a file is
Server, Local Disk
of the server or system receiving the source configuration.
required to send the configuration file from an FTP server.
Path name to the target directory on the local system disk
From
and Switch.