5-28 WS5100 Series Switch System Reference Guide
Preferred Source
NTP Version
4. Select an existing neighbor and click the
address, version, authentication key ID and preferred source designation.
5. Select an existing entry and click the
6. Click the
Add
configurations displayed within the NTP Neighbor tab.For more information, see
on page
5-28.
5.3.4 Adding an NTP Neighbor
To add a new NTP peer or server neighbor configuration to those available for synchronization:
1. Select
Services
2. Select the
NTP Neighbor
3. Click the
Add
4. Select the
Peer
current subnet.
5. Select the
Server
Displays whether this NTP resource is a preferred NTP resource. Preferred sources
(those with a checkmark) are contacted before non-preferred resources. There can
be more than one preferred source.
Displays a NTP version between 1 and 4. Currently version three and four
implementations of NTP are available. The latest version is NTPv4, but the official
Internet standard is NTPv3.
Edit
Delete
button to define a new peer or server configuration that can be added to the existing
>
Secure NTP
from the main menu tree.
tab.
button.
checkbox if the SNTP neighbor is a peer to the switch (non FTP server) within the switch's
checkbox if the neighbor is a server within the switch's current subnet.
button to modify the existing peer or server designation, IP
button to remove it from the table.
Adding an NTP Neighbor