Motorola WS5100 Series Reference Manual page 185

4.8.1.1 Editing Default Access Port Adoption Settings
Use the Edit screen to dedicate a target radio as a detector radio, as well as change the radios settings
(placement, power and channel) and advanced properties (antenna setting, maximum associations, adoption
preference etc.).
To edit radio adoption configuration settings:
1. Select Network Setup
2. Click the Configuration
3. Select a radio from the table.
4. Click the Edit
selected radio type (either 802.11a or 802.11bg).
The Properties
cannot be modified. The
only and cannot be modified
5. To use this radio as a detector to identify rogue APs on your network, check the box titled
AP as Detector AP.
the network. Dedicated detectors do not connect to by clients.
6. Select the Single-channel scan for Unapproved APs
devices using its only its current channel of operation.
7. Select the Enable Enhanced Beacon Table
association information.
8. Select the Enable Enhanced Probe Table
the switch.
> Access Port Adoption Defaults
tab.
button to display a screen to change the radio adoption default values for the currently
field displays the model family for the selected access port. The model is read only and
Radio Type displays the radio type (802.11a or 802.11bg). This value is read
Setting this radio as a detector will dedicate this radio to detecting rogue APs on
from the main menu tree.
checkbox to enable the switch to detect rogue
checkbox to allow the AP to receive beacons and
checkbox to allow an AP to forward MU probe requests to
4-103
Network Setup
Dedicate this