Motorola WS5100 Series Reference Manual page 194

4-112 WS5100 Series Switch System Reference Guide
2. Click the Adopted AP
3. Refer to the
MAC Address
Model
Serial
HW Version
IP Address
Bootloader
Protocol Version
Fw Version
Radio Indices
4. Click the Export
tab.
Adopted AP screen for the following information:
Displays the radio's first MAC address when it is adopted by the switch.
Displays the model number of the access port.
Displays the serial number of the access port, and is used for switch management
purposes. It is read-only and cannot be modified.
Displays the hardware version of the access port. This information can be helpful
when troubleshooting problems with the access port.
Displays the IP address of the adopted access port.
Displays the software version the access port boots from. This information can be
helpful when troubleshooting problems.
Displays the version of the interface protocol between the access port and the
switch. This information can be helpful when troubleshooting problems with the
access port.
Displays the access port firmware version at run time. Use this information to
assess whether the software requires an upgrade for better compatibility with the
switch.
Displays the indices of the radios belonging to the selected access port. These
indices are equivalent to a numerical device recognition identifier (index) for the
radio.
button to export the contents of the table to a Comma Separated Values file (CSV).