Reviewing Found Beacons - Motorola WS5100 Series Reference Manual

11. 802.11bg Radios:
and forward them to the switch.
12. 802.11bg Radios:
to the switch.
13. Click Apply to save any changes. Navigating away from the screen without clicking the Apply button results
in all the changes on the screen being discarded.
14. Click the Revert button to undo the changes to the screen and revert to the last saved configuration.

6.11.3 Reviewing Found Beacons

Select the Beacons Found
displays beacon information collected during the AP's channel scan. The table contains at least 5 entries for
each AP radio (channel) scan. The information displayed within the Beacons Found tab is read-only with no
user configurable parameters.
To view the enhanced beacons report:
1. Select Security
2. Select the Beacons Found
3. Refer to the following information as displayed within the
Portal MAC
Rogue AP MAC
Signal Strength
(dBm)
Click the Enable button to allow the AP's 802.11bg radios to receive MU probe requests
Click the Disable button to stop AP's 802.11bg radios from forwarding MU probe requests
tab to view the enhanced beacons report created by the switch. The table
> Enhanced Probe/Beacon Table
tab.
Displays the MAC address of the unadopted AP detected by the enhanced beacon
supported AP.
Displays the MAC address of the enhanced beacon supported AP.
Displays the signal strength when the unadopted AP was detected.
from the main menu tree.
Beacons Found tab.
6-95
Switch Security