Viewing Access Port Information - Motorola WS5100 Series Reference Manual

3. Select a MU from the table displayed in the Statistics screen and click the
4. Select a checkbox to display that metric charted within the graph. Do not select more than four
checkboxes at any one time.
5. Refer to the Status
messages if something goes wrong in the transaction between the applet and the switch.
6. Click Close to close the dialog without committing updates to the running configuration.

4.7 Viewing Access Port Information

The Access Ports screen displays a high-level overview of the APs created for use within the switch
managed network. Use this data as necessary to check all the APs that are active, their VLAN assignments,
updates to a APs description as well as their current authentication and encryption schemes.
NOTE: Each switch can support a maximum of 48 access ports. However, port adoption
per switch is determined by the number of licenses acquired.
NOTE: The Motorola RF Management Software is a recommended utility to plan the
deployment of the switch and view its configuration once operational. Motorola RFMS
can help optimize the positioning and configuration of a switch and access ports in
respect to a WLAN's MU throughput requirements. For more information, refer to the
Motorola Web site.
The Access Ports screen consists of the following tabs:
• Configuring Access Port Radios
• Viewing AP Statistics
field for the current state of the requests made from applet. This field displays error
4-81
Network Setup
Graph button.