Motorola WS5100 Series Reference Manual page 207

4.10.4.1 Editing a Port Instance Configuration
To edit and reconfigure Port Instance parameters.
1. Select a row from the port table and click the
Most of the MST Port Instance parameters can be reconfigured, as indicated below.
Port Instance ID
Port Index
Port Priority
Admin Internal Path
Cost
Operational Internal
Path Cost
Read only indicator of the instance ID used as a basis for other modifications.
Read only indicator of the port index used as a basis for other modifications.
If necessary, change the port priority value for the bridge. The lower the priority, a
greater likelihood of the bridge becoming a root.
If necessary, change the value for the Admin Internal Root Cost of a path associated
with an interface.
A lower the path cost, the greater likelihood of the specific interface becoming a
root.
Displays the Operational Internal Root Cost of a path associated with an interface.
A lower the path cost, the greater likelihood of the specific interface becoming a
root.
Edit button.
4-125
Network Setup