Motorola WS5100 Series Reference Manual page 97

8. Use the Secondary IP Addresses
The address provided in this field is used if the primary IP address is unreachable.
Select the Add
sub screen. Choose an existing secondary address and select
secondary address.
9. Refer to the Status
messages if something goes wrong in the transaction between the applet and the switch.
10.Click OK to use the changes to the running configuration and close the dialog.
11.Click Cancel
4.4.1.2 Modifying a Virtual Interface
To modify an existing virtual interface.
CAUTION: When changing from a default DHCP address to a fixed IP address, set a static
route first. This is critical when the switch is being accessed from a subnet not directly
connected to the switch and the default route was set from DHCP.
1. Select Network
2. Select the Configuration
The screen displays with the name of the VLAN in the upper left-hand side. The VLAN ID cannot be
modified and should be used to associate the VLAN ID with the description and IP address assignments
defined.
3. If necessary, modify the
operation within the switch managed network.
4. Unselect the Use DHCP to obtain IP Address automatically
manually and you do not want DHCP to provide them.
5. Use the Primary IP Address
6. Enter the Subnet Mask
field to define additional IP addresses to associate with VLAN IDs.
button (within the Secondary IP Addresses field) to define additional addresses from a
field for the current state of the requests made from applet. This field displays error
to close the dialog without committing updates to the running configuration.
> Switch Virtual Interface from
tab and click the
Description of the VLAN, to make it representative of the VLAN's intended
field to manually enter the IP address for the virtual interface.
for the IP address.
Edit or Delete
the main tree menu.
Edit button.
checkbox to assign IP addresses
4-15
Network Setup
to revise or remove a