Reviewing Acl Statistics - Motorola WS5100 Series Reference Manual

6-28 WS5100 Series Switch System Reference Guide
4. Define a WLAN Index
5. Use the IP ACL
6. Use the MAC ACL
7. Select either the
8. Refer to the
messages if something goes wrong in the transaction between the applet and the switch.
9. Click OK to use the changes to the running configuration and close the dialog.
10.Click Cancel

6.5.5 Reviewing ACL Statistics

Use the Statistics
tab only displays data for router ACLs.
NOTE: ACL statistics are only displayed for router ACLs.
To review ACL statistics:
1. Select Security
between 1 and 32.
drop-down menu to select an IP ACL for the WLAN.
drop-down menu to select the MAC ACL for the WLAN interface.
Inbound or Outbound
Status field for the state of the requests made from applet. This field displays error
to close the dialog without committing updates to the running configuration.
tab to view set of statistics for those ACLs defined for use with the switch. The Statistics
> ACLs from the main menu tree.
radio button to define which direction the ACL applies.