Motorola WS5100 Series Reference Manual page 155

WS5100 (config-wireless) #wlan 1 nac-server secondary 192.168.1.20
WS5100 (config-wireless) #
d. Configure the secondary NAC Server's Radius Key.
WS5100 (config-wireless) #wlan 1 nac-server secondary radius-key my secret-2
WS5100 (config-wireless) #
3. MUs not NAC authenticated use Radius for authentication. To configure the WLAN's Radius settings:
a. Configure the Radius server's IP address.
WS5100 (config-wireless) #wlan 1 radius-server primary 192.168.1.30
WS5100 (config-wireless) #
b. Configure the server's Radius Key
WS5100 (config-wireless) #wlan 1 radius-server primary radius-key my-rad-secret
WS5100 (config-wireless )#
c. Configure the secondary Radius server's IP address.
WS5100 (config-wireless) #wlan 1 radius-server secondary 192.168.1.40
WS5100 (config-wireless) #
d. Configure the secondary server's Radius Key.
WS5100 (config-wireless) #wlan 1 radius-server secondary radius-key my-rad-secret-2
WS5100 (config-wireless) #
4. Configure the NAC server's timeout and re-transmit settings. The timeout parameter configures the
duration for which the switch waits for a response from the Radius server before attempting a retry. This
is a global setting for both the primary and secondary server.
The re-transmit parameter defines the number of retries a switch attempts before dis-associating
the MU.
WS5100 (config-wireless) #wlan 1 nac-server timeout 30 retransmit 10
WS5100 (config-wireless) #
5. Configure WLAN for EAP authentication and define the encryption type.
WS5100 (config-wireless) #wlan 1 authentication-type eap
WS5100 (config-wireless) #wlan 1 encryption-type wep128
WS5100 (config-wireless) #wlan 1 ssid wlan-1
4-73
Network Setup