Configuring Access Control - Motorola WS5100 Series Reference Manual

7-2 WS5100 Series Switch System Reference Guide
To display the main Management screen:
1. Select Management Access
2. Refer to the
Firmware In Use
Log Output
NOTE: The
screen, as this screen is has no configurable parameters for the user to update and save.

7.2 Configuring Access Control

Refer to the Access Control
protocols (HTTP, HTTPS, Telnet, SSH or SNMP) available to users. Access options are either enabled or
disabled as required. The Access Control screen is not meant to function as an ACL (in routers or other
firewalls), where you can specify and customize specific IPs to access specific interfaces.
To configure access control settings:
from the main menu tree.
Current Status field to review the following read-only information:
The Firmware In Use
switch. Use this information to assess whether a firmware update would improve
the switch feature set and functionality.
The Log Output value displays the target location for log files output by the switch.
Apply and Revert
screen to allow/deny management access to the switch using the different
value displays the software version currently running on the
functions are greyed out within the Management Access