Motorola WS5100 Series Reference Manual page 387

5. Select the role you want to assign to the new user from the options provided in the
panel. Select one or more of the following options:
Monitor
Help Desk Manager
Network
Administrator
System Administrator Select
Web User
Administrator
Super User
NOTE: There are some basic operations/CLI commands (exit, logout and help) available to
all user roles. All the roles except Monitor can perform Help Desk role operations.
NOTE: By default, the switch is HTTPS enabled with a self signed certificate. This is
required since the Web UI uses HTTPS for user authentication.
6. Select the access modes to assign to the new user from the options provided in the
panel. Select one or more of the following options:
Console
SSH
Telnet
Applet
7. Refer to the Status
messages if something goes wrong in the transaction between the applet and the switch.
8. Click the OK button to create the new user.
9. Click Cancel
7.6.1.2 Modifying an Existing Local User
To create a new local user:
1. Select Management Access
2. Select a user from the Users list and click the
3. The Username
4. Enter the new authentication password for the user in the
Confirm Password
Select Monitor to assign regular user permissions without any administrative
rights. The Monitor option provides read-only permissions.
Assign this role to someone who typically troubleshoots and debugs problems
reported by the customer. The Help Desk Manager typically runs troubleshooting
utilities (like a sniffer), executes service commands, views/retrieves logs and
reboots the switch.
The Network Administrator
parameters like IP config, VLANs, L2/L3 security, WLANs, radios, IDS and hotspot.
System Administrator
NTP, boot parameters, licenses, perform image upgrade, auto install, manager
redundancy/clustering and control access.
Assign Web User Administrator
(hotspot).
Select Super User to assign complete administrative rights.
This option provides the new user access to the switch using the console.
This option provides the new user access to the switch using SSH.
This option provides the new user access to the switch using a Telnet session.
This option provides the new user access to the switch through the Web UI (applet).
field for the current state of the requests made from applet. This field displays error
to revert back to the last saved configuration without saving any of your changes.
> Users
field is read-only field and displays the login name of the user.
field.
has privileges to configure all wired and wireless
to allow the user to configure general settings like
privileges to add users for Web authentication
from the main menu tree.
Edit button.
Password
Switch Management
Associated Roles
Access Modes
field and reconfirm within the
7-21