Motorola WS5100 Series Reference Manual page 201

Internal Root Cost
Root Port
Master Port
VLANs
3. Select an ID and click the
4.10.2.1 Creating a Bridge Instance
To create a VLAN instance and associate it with a bridge as a numerical identifier:
1. Select Network
2. Select the Bridge Instance
3. Click the Add
4. Enter a value between 1 and 15 as the Instance ID.
5. Click OK to save and commit the changes.
6. The Bridge Instance tab with now display the new instance ID.
7. Click Cancel
4.10.2.2 Associating VLANs to a Bridge Instance
1. Select Network
2. Select the Bridge Instance
3. Select an ID from the table within the Bridge Instance tab and click on the
4. Enter a VLAN ID between 1 to 4094 in the VLAN ID field. This VLAN ID is associated with the Instance
index. You can add multiple VLANs to an instance.
5. Click OK to save and commit the new configuration.
Displays the configured path cost on a link connected to this port within the internal
MSTP region.
Displays the MAC address of the root port.
Displays the MAC address of the master port.
Displays the number of VLANs included in this MSTP instance.
Delete button to remove from the list.
> Multiple Spanning Tree
tab.
button.
to disregard the new Bridge Instance ID.
> Multiple Spanning Tree
tab.
from the main menu tree.
from the main menu tree.
4-119
Network Setup
Add VLANs button.