Motorola WS5100 Series Reference Manual page 320

6-50 WS5100 Series Switch System Reference Guide
4. Revise the following information as required to render the existing transform set useful.
Name
AH Authentication
Scheme
ESP Encryption
Scheme
ESP Authentication
Scheme
Mode
5. Refer to the
messages if something goes wrong in the transaction between the applet and the switch.
The name is read-only and cannot be modified unless a new transform set is
created.
Select the Use AH checkbox (if necessary) to modify the AH Transform
Authentication scheme. Options include:
• None - No AH authentication is used.
• AH-MD5-HMAC - AH with the MD5 (HMAC variant) authentication algorithm.
• AH-SHA-HMAC - AH with the SHA (HMAC variant) authentication algorithm.
Select the Use ESP checkbox (if necessary) to modify the ESP Encryption Scheme.
Options include:
• None - No ESP encryption is used with the transform set.
• ESP-DES - ESP with the 56-bit DES encryption algorithm.
• ESP-3DES - ESP with 3DES, ESP with AES.
• ESP-AES - ESP with 3DES, ESP with AES (128 bit key).
• ESP-AES 192 - ESP with 3DES, ESP with AES (192 bit key).
• ESP-AES 256 - ESP with 3DES, ESP with AES (256 bit key).
Select the Use ESP checkbox (if necessary) to modify the ESP Authentication
Scheme. Options include:
• None - No ESP authentication is used with the transform set.
• MD5-HMAC - AH with the MD5 (HMAC variant) authentication algorithm.
• SHA-HMAC - AH with the SHA (HMAC variant) authentication algorithm.
Modify (if necessary) the current mode used with the transform set. The mode is
either Tunnel or Transport.
Status field for the state of the requests made from applet. This field displays error