Motorola WS5100 Series Reference Manual page 167

Port Authentication
To configure the port authentication settings on an access port:
1. Select Network
2. Click the Configuration
3. Click the Global Settings
4. Click the Configure Port Authentication
5. Enter the 802.1x
6. Enter the 802.1x
authorization adoption.
NOTE: The default user name and password for AP300 port authentication is a user name
of
7. Check the Use Default Values
values. The access port can get disconnected if the 802.1x authenticator is not configured accordingly.
NOTE: 802.1x username and password information is only passed to adopted access
ports when the Username and Password are set. Any AP adopted after this does not
automatically receive a username and password.
NOTE: After setting the username and password to factory default settings, the system
must be rebooted before the factory default settings are applied
8. Refer to the Status
messages if something goes wrong in the transaction between the applet and the switch.
9. Click OK to use the changes to the running configuration and close the dialog.
10.Click Cancel
4.7.1.2 Editing AP Settings
The Edit screen provides a means of modifying the properties of an existing radio. This is often necessary
when the radio's intended function has changed and its name needs modification or if the radio now needs
to be defined as a detector radio. The Edit screen also enables you to modify placement, channel and power
> Access Port Radios
tab.
button.
Username assigned to the access port.
Password (for the corresponding username) providing authorization for access port
admin and a password of symbol.
option checkbox to set the Username and Password to factory default
field for the current state of the requests made from applet. This field displays error
to close the dialog without committing updates to the running configuration.
from the main menu tree.
button.
4-85
Network Setup