Motorola WS5100 Series Reference Manual page 174

4-92 WS5100 Series Switch System Reference Guide
2. Click the Statistics
3. To select the time frame for the radio statistics, select either
table.
• Select the Last 30s radio button to display statistics for the last 30 seconds for the radio.
• Select the Last Hr radio button to display statistics from the last hour for the radio.
4. Refer to the table for the following information:
Index
Description
Type
MUs
Throughput Mbps
Average Mbps
RF Util
% Non-UNI
Retries
tab.
Displays the numerical index (device identifier) used with the radio. Use this index
(along with the radio name) to differentiate the radio from other device radios.
Displays the name used with the radio. Use this name (along with the radio index)
to differentiate the radio from other device radios.
Identifies whether the radio is an 802.11a radio or an 802.11 bg radio.
Displays the number of MUs currently associated with the access port.
Displays the average throughput in Mbps for the selected radio. The Rx column
displays the average throughput in Mbps for packets received on the selected
radio. The Tx column displays the average throughput for packets sent on the
selected radio.
Displays the average bit speed in Mbps on the selected access port. This value
includes packets both sent and received.
Displays the percentage of the total packets for the selected radio that are non-
unicast packets. Non-unicast packets include broadcast and multicast packets.
Displays the percentage of packets for the selected radio that are non-unicast
packets. Non-unicast packets include broadcast and multicast packets.
Displays the average number of retries for all MUs associated with the selected
radio.
Last 30s or Last Hr above the statistics