Motorola WS5100 Series Reference Manual page 60

3-14 WS5100 Series Switch System Reference Guide
3.2.3.1 Detailed Port Statistics
To view detailed statistics for a port:
1. Select a port from the table displayed within the Statistics screen.
2. Click the Details
3. The Interface Statistics
port:
Name
MAC Address
Input Bytes
Input Unicast
Packets
Input NonUnicast
Packets
Input Total Packets
Input Packets
Dropped
Input Packets Error
Output Bytes
button.
screen displays. This screen displays the following statistics for the selected
Displays the port name.
Displays physical address information associated with the interface. This address
is read-only (hard-coded at the factory) and cannot be modified.
Displays the number of bytes received on the interface.
Displays the number of unicast packets (packets directed towards the interface)
received on the interface.
Displays the number of NonUnicast Packets (Multicast and Broadcast Packets)
received on the interface.
Displays the total number of packets received on the interface.
Displays the number of received packets dropped by the interface by the input
Queue of the hardware unit /software module associated with the VLAN. Packets
are dropped when the input Queue is full or unable to processing incoming traffic.
Displays the number of packets with errors received on the interface. Input Packet
Errors are input errors due to; no buffer space/ignored packets due to broadcast
storms, packets larger than maximum packet size, framing errors, input rate
exceeding the receiver's date handling rate or cyclic redundancy check errors. In
all of these cases, an error is reported and logged.
Displays the number of bytes transmitted from the interface.