Motorola WS5100 Series Reference Manual page 96

4-14 WS5100 Series Switch System Reference Guide
4. Select a record from the table and click the
switch virtual interfaces.
5. Click the Add
Adding a Virtual Interface on page
6. Select an interface as click the
is booted.
7. Select an interface as click the
4.4.1.1 Adding a Virtual Interface
To add a new switch virtual interface:
1. Select Network
2. Select the Configuration
3. Click on the
4. Enter the VLAN ID
5. Provide a Description
managed network.
6. The Primary IP Settings
a. Select Use DHCP to obtain IP Address automatically
for the virtual interface. Selecting this option disables the IP address field.
b. Enter the
c. Enter the
7. Select the Set as Management Interface
configure the switch.
button to add a new configuration to the switch virtual interface. For more information, see
4-14.
Startup
Shutdown
> Switch Virtual Interface from
tab.
Add button.
for the switch virtual interface.
for the VLAN, representative of the VLAN's intended operation within the switch
field consists of the following:
IP Address for the VLAN associated virtual interface.
Subnet Mask for the IP address.
Delete button to remove the configuration from the list of
button to invoke the selected interface the next time the switch
button to disable the selected interface.
the main tree menu.
to allow DHCP to provide the IP address
checkbox to enable any host displayed in this VLAN to