Viewing Virtual Interface Statistics - Motorola WS5100 Series Reference Manual

4-16 WS5100 Series Switch System Reference Guide
7. Select the Set as Management Interface
interface.
8. Use the Secondary IP Addresses
VLAN IDs. The addresses provided will be used if the primary IP address is unreachable.
Select the Add
from a sub screen. Select an existing secondary address and select
secondary address as needed.
9. Refer to the
messages if something goes wrong in the transaction between the applet and the switch.
10.Click OK to use the changes to the running configuration and close the dialog.
11.Click Cancel

4.4.2 Viewing Virtual Interface Statistics

The Statistics
To view virtual interface statistics:
1. Select Network
2. Select the Statistics
3. Refer to the following to assess the network throughput of existing virtual interfaces:
Name
Bytes In
field to define/modify additional IP addresses to associate with
button (within the Secondary IP Addresses field) to define/modify additional addresses
Status field for the current state of the requests made from applet. This field displays error
to close the dialog without committing updates to the running configuration.
screen displays information about packet level statistics and errors at the interface.
> Switch Virtual Interface
tab.
Displays the user defined interface name. The corresponding statistics are
displayed along the row. The statistics are the total traffic to the interface since
its creation.
Displays the number of bytes coming into the interface. The status is not self-
updated. To view the current status, click the
checkbox to convert the selected VLAN ID to a management
Edit
from the main tree menu.
Details button.
or Delete to revise or remove a